PSL Jet Atomizer

The PSL Jet Atomizer is a versatile, low-cost, rugged unit capable of testing cleanroom systems up to 100,000 cfm with Polystyrene Latex (PSL) spheres. It is ideal for certifying cleanrooms in microelectronic facilities or where traditional oil-based aerosols are not desirable.
Click here to configure this product.

TDA-D10 & TDA-D100 Aerosol Diluters

The ATI Aerosol Diluters were developed to fill a specific need in the high efficiency filter testing industry. The diluter enhances the operating range of optical particle counters by diluting the upstream concentration of an aerosol to prevent saturation of the particle counter. The diluter has been designed to minimize pressure drop and aerosol loss as a function of particle size.
Click here to configure this product.

CAS 5 Clean Air Source

The ATI Clean Air Source Model 5 removes oil or other liquid droplets from the incoming air using two pre-filters and an oil removal filter.  Any remaining moisture in the air stream is removed by passing the air through a membrane dryer.  It also allows adjustment of the output pressure using an included gas-regulator valve.  This compressed-air conditioner handles a maximum flow rate of 141 liters per minute (5 cfm).  Its maximum inlet pressure is 1000 kPa (150 psi).
Click here to configure this product.

DD 250 Diffusion Dryer

The ATI Diffusion Dryer Model 250 is designed as a general-purpose aerosol dryer.  A water trap at the inlet removes coarse water droplets.  The aerosol is then passed through a removable cartridge containing the silica gel.  The cartridge is formed by two concentric cylinders, an inner fine mesh screen and an outer wire mesh screen.
Click here to configure this product.